Product Detail U322

GUBAILI U322 UV Adhesive for Transparent Plastics

GUBAILI U322 UV adhesive for transparent plastics: clear, viscosity 800-1200 cP, cures in 10-20 seconds under UV light, shear strength >=18 N/mm². Suitable for acrylic, PVC, ABS and PS. 50 ml pack.

High Strength

High bond strength for structural joints under heavy loads.

Low Blooming

Minimal blooming after cure keeps surfaces clean.

Transparent

Clear after cure for appearance-critical applications.

UV Curing

Fast curing under UV light.

Product Parameters

Technical Parameters
ParameterSpecification / Value
Viscosity800 ~ 1200 cP
ColorClear to pale yellow liquid
Cure Time10 ~ 20 seconds (UV exposure)
Shear Strength (Acrylic/PVC)>= 18 N/mm²
UV Energy Required1200 mJ/cm²
SubstratesAcrylic, PVC, ABS, PS and other common transparent plastics
Shelf Life12 months
StorageCool, dry, dark place
Packaging50 ml

Product Details

Product Introduction

Product Overview

U322 is a UV-curing adhesive developed for transparent plastic substrates. The adhesive is a clear to pale yellow liquid and cures to a clear, attractive bond line with no white haze or marks, preserving the appearance of plastic parts. Viscosity 800-1200 cP with moderate leveling, it cures rapidly under 365 nm UV light and reaches initial set in 10-20 seconds under standard conditions, suitable for high-speed production lines. After curing, it bonds acrylic, PVC and other plastics firmly, with shear strength above 18 N/mm², good toughness, low risk of stress cracking and stable weather resistance.

Industries

For bonding transparent plastic parts, widely used in acrylic, PVC, ABS and PS crafts, plastic display stands, plastic decorative parts and transparent plastic fittings.

Instructions

1. Clean the bonding surfaces, removing oil, dust and mold release, and ensure they are dry and clean;
2. Apply adhesive evenly, align and join the parts, and remove air bubbles from the bond line;
3. Cure with a 365 nm UV lamp at an energy dose of at least 1200 mJ/cm²; extend exposure for thicker bond lines;
4. Handle, sand or process only after full cure; uncured squeeze-out can be wiped off with anhydrous alcohol.

Precautions

1. Store sealed in a cool, dry, dark place away from sunlight and strong UV sources;
2. Wear gloves and goggles to avoid contact with skin and eyes;
3. Not suitable for dark or opaque plastics; areas that light cannot reach will not cure;
4. Control the bond gap—larger gaps cure more slowly;
5. Shelf life 12 months; do not use expired product.

FAQ

FAQ
What conditions must be controlled when applying UV adhesive?

Substrates must be clean and dry, and the bond line should not be too thick, as this affects through-cure. Set lamp distance, power and time according to the process; moving the lamp slightly during exposure reduces shadowed areas.

For stress-sensitive plastics such as PC, be aware of stress-cracking risk from the adhesive; confirm with a small trial first.

Can UV adhesive cure in areas that light cannot reach?

A pure UV system requires UV exposure to cure; shadowed areas and opaque laminates cannot cure fully.

For such structures, use a dual-cure system, irradiate from a transparent side, or use a primer for local treatment.

How do I choose a UV adhesive, and what is the difference between U321, U322 and U323?

Choose U321 for glass, crystal and handicrafts; U322 for transparent plastics such as acrylic, PC and PS; U323 for glass-to-metal and hardware composite parts.

Confirm that the substrate transmits UV light, and check bond-line thickness and lamp distance. If the metal side is opaque, use a dual-cure system or irradiate from the transparent side after dispensing.

What should I watch out for when bonding transparent plastics with U322?

For transparent plastics such as acrylic, PC and PS; it cures quickly and leaves a clear bond line.

Materials such as PC carry a stress-cracking risk; run a small trial and avoid leaving adhesive in stressed areas for extended periods.

Related Products

More UV-Curing Adhesives Options

Need a formulation matched to your application?

We customise formulations by substrate, viscosity, cure speed and media resistance, and provide sample testing and technical selection support.

Custom Bonding Solutions

Need adhesive selection advice or sample testing?

Tell us about your application and our engineers will provide product recommendations, sample dispatch and technical support within 48 hours.

×